e26f1d14

14:21. Removal and installation of the diagnostic module of safety cushions (ADU)

Before starting implementation of the procedure, examine with provided in the Section of the Safety cushion - the general information and precautionary measures the list of security measures!

Details of the ADU SRS installation

1 — ADU
2 — a grounding Wire

3 — C299 (yellow)
4 — Fixing hairpins


 PERFORMANCE ORDER

  1. Disconnect from the battery at first negative, then positive wires and wait within not less than 10 minutes.
  2. Turn out fixing screws, cock the lever of the parking brake and remove back section of the central console (see the Head Kuzov).
  3. Remove forward section of the central console (see the Head Kuzov), - the lever of the AT selector should be transferred to extreme back situation, and to remove the handle from the lever of switching of the modes of the transfer case and to disconnect an electrical wiring.
  4. Wring out a lock uvula and disunite the contact socket of an electrical wiring on the right side of the ADU block.
  5. Unbend a carpet from the forward party of the console, release three fixing nuts and remove the diagnostic block from the lower forward basic arm of the dashboard.
  6. Installation is made upside-down, - fixing nuts drag on with effort of 15 ÷ 18 Nanometers.