9. Automatic transmission
Specifications
General data
| Type of automatic transmission | 4-staged (including the raising transfer) productions of the Aisin Warner company |
| Designation | AW372LE |
| Lubrication system type | Pressure head with the oil pump |
| Cooling system type | Two-level, with the additional heat exchanger |
| Hydrotransformer (rotation converter) | |
|
3-element, 1-staged, 2-phase, with the blocking mechanism |
|
1.9 |
| Oil pump | |
|
Trokhoidny rotor |
|
From the engine |
| Gear shifting mechanism | |
|
1-staged with a planetary reducer, 4 forward transfers, 1 back |
|
See the Section of Feature of operation of the cars equipped with the catalytic converter in the Head Governing bodies and methods of operation |
|
|
|
3 sets |
|
4 sets |
|
3 sets |
|
|
|
2.826:1 |
|
1.493:1 |
|
1.000:1 |
|
0.730:1 |
|
2.703:1 |
| Turnover of Stall-Test, mines-1 | 2000 ÷ 2300 |
| Distribution of the main pressure on single turns and when checking Stall-Test | See the Section of System of electric equipment of the engine |
The codes of diagnostics of system of electronic control by automatic transmission taken by means of the OBD II scanner
|
DTC |
The codes highlighted by a control lamp |
Violation source |
| P0722 | 55 | Lack of an output signal of VSS |
| P0743 | 63 | Malfunction in a chain Ý/m the valve of blocking of the hydrotransformer |
| P0753 | 60 | Malfunction in a chain Ý/m the valve switch A |
| P0758 | 61 | Malfunction in a chain Ý/m the valve switch B |
| P1121 | 12 | Violation of signal transmission of TPS from ECM to TCM |
| P1500 | 6 | Malfunction in VSS chain |
Principle of highlighting of codes of malfunctions control lamp of HOLD
А: 1.2 with, In: 1.6 with, With: 0.4 with, D: 4.0 with
Efforts of tightening of threaded connections, Nanometer
|
|
Efforts of tightening of separate elements of fixture can be given directly in the text of sections where they are highlighted in bold type. |
| Bolt of fastening of the sensor switch of provision of transmission (PNP) | 3.9 ÷ 6.9 |
| Cap of the service union of check of the main pressure | 14.7 ÷ 17.6 |
| Bolts of fastening of transmission to the transfer case | 44 |
| Bolts of fastening of transmission to the engine | |
|
57 ÷ 81 |
|
69 ÷ 88 |
| Bolts of a support of a suspension bracket of the power unit | 69 ÷ 88 |
| Bolts of fastening of a basic cross beam to a frame | 31 ÷ 46 |
| Nipple nuts of fastening of tubes of a path of cooling of ATF | |
|
31 ÷ 47 |
|
24 ÷ 35 |
| Basic arm of lines of a path of cooling of ATF | 0.39 ÷ 0.58 |
| Bolts of fastening of pump assembly of AT | 6 ÷ 9 |
| Bolts of fastening of a sealing element of pump assembly | 18 ÷ 25 |
| Bolts of fastening of sections of valvate assembly | 8 ÷ 12 |
| Bolts of fastening of a maslootrazhatel | 5 ÷ 6 |
| Bolts of fastening of the pallet of a case of AT | 4 ÷ 5 |
| Bolts of fastening of an adaptor cover | 27 ÷ 42 |
| Bolt of the fixing spring of the valve of manual switching | 5 ÷ 6 |
| Bolt of a throttle cam | 6 ÷ 9 |
| Bolts of the reducing valve | 5 ÷ 6 |
| Bolts of plates of valvate assembly | 5 ÷ 6 |
| Bolts of the AT central support | 24 ÷ 28 |
| Bolts of fastening of the hydrotransformer | |
|
27 ÷ 42 |
|
48 ÷ 68 |
| Bolts Ý/m valves switches | 6 ÷ 12 |
| Bolt Ý/m the valve of the blocking hydrotransformer coupling | 5 ÷ 6 |
| Nuts of fastening of assembly of the lever of the selector | 18 ÷ 27 |
| Bolts of fastening of the lever of switching of the modes of the transfer case | 22 ÷ 28 |
| Adjusting nut of a driving cable of AT | 2 ÷ 3 |
| Adjusting nut of a cable of gas | 15.7 ÷ 22.5 |
| Shpindelny bolt of the lever of the selector | 11.7 ÷ 16.7 |
| Screws of fastening of the indicator of position of the lever of the selector | 2.0 ÷ 3.0 |
| Screw of fastening of the handle of the lever of the selector | 2.0 ÷ 3.0 |