14:12. Saloon lamps - replacement of lamps, check of serviceability of functioning
Main saloon lamp (all models)
Design of the saloon lamp
Replacement of a lamp
|
|
|
|
- Having accurately hooked the screw-driver with a flat sting, remove a plafond of the saloon lamp.
|
- Take a 2-socle lamp from the sprung contacts and establish replaceable on its place.
|
|
Checks
Three-position switch of the saloon lamp
|
|
- Remove a plafond and take a lamp.
|
|
- Turn out three fixing screws, remove the lamp and disunite the contact socket of its electrical wiring.
|
- Check correctness of distribution of conductivity between plugs of the contact socket of the lamp in each of provisions of the three-position switch (see the table).
Check of serviceability of functioning of the three-position switch of the saloon lamp
- In case of need make replacement.
- Assembly is made as it should be, the return to an order of dismantle of components.
|
|
Door sensors switches
|
|
|
|
- Unbend a boot and turn out the screw of fastening of the switch.
|
|
|
- By means of an ohmmeter / лампы-пробника check serviceability of functioning of the switch, - in the released situation conductivity has to take place, in pressed - no.
|
|
|
Lamp of illumination of the luggage compartment (only 5-door models)
|
|
- Open a back door.
|
|
- Having accurately hooked the screw-driver with a flat sting, dismantle a lamp lens.
|
- Having wrung out a spring clamp, accurately take a lamp, - try not to drop it in a cavity under the finishing panel, - and establish replaceable on its place.
- Put into place a lamp lens, - track reliability of a zashchelkivaniye of lock uvulas.
|
|
