e26f1d14

15. Control body sizes

General information

In automotive industry two ways of removal of the control sizes between reference points of elements of the body/chassis can be used: direct and projective. The shortest distance between chosen points on the straight line connecting them is measured in the first case. In the second case length of a projection of this line on certain measured - usually horizontal - the plane is defined.

Two removals of the main control sizes used in automotive industry of a way between reference points of elements of the body/chassis


In the section illustrative material on removal of the control sizes and tables of their nominal rates is given below.

All provided data are taken off in the direct way if opposite is not stipulated especially.

Control sizes of a front of a body (all models)

AND, AND’ Openings under back bolts of fastening of wings (Ø of 10 mm)
IN, IN’ Openings under forward boltykrepleniye of wings (Ø of 10 mm)
With Nut of fastening of the brake line (Ø of 6 mm)
D, D’ Nuts of fastening of block headlights (Ø of 9.8 mm)
E, E’ Basic welding openings (left: Mm Ø8x10, right: Ø 8 mm)
F Opening under fastening of a plait of an electrical wiring (Ø of 7 mm)


Number of measurement 1 2 3 4 5 6 7 8 9
Nominal rate, mm 1293 696 1257 696 1452 930 1057 993 1103
Number of measurement 10 11 12 13 14 15
Nominal rate, mm 995 1140 282 1000 282 1104

Side control sizes (5-door models)


And Top basic opening of the amplifier of a side beam (Ø of 8 mm)
In Lower basic opening of the amplifier of a side beam (Ø of 7х10 mm)
With The top opening under fastening of the top loopy level of a forward door (Ø of 12 mm)
D The lower opening under fastening of the lower loopy level of a forward door (Ø of 12 mm)
E The top opening under fastening of the top loopy level of a back door (Ø of 10 mm)
F The lower opening under fastening of the lower loopy level of a back door (Ø of 12 mm)
G Opening under fastening of the sensor switch of a back door (Ø of 15.8 mm)
N Opening under fastening of an overlay of a threshold of a back door (Ø of 8.5 mm)
I Opening under fastening of a rear bumper

Number of measurement 1 2 3 4 5 6 7 8 9
Nominal rate, mm 110 889 1992 2000 912 898 921 380 1113
Number of measurement 10 11 12 13 14 15 16 17 18
Nominal rate, mm 1169 1177 1114 360 924 1493 763 991 1474
Number of measurement 19 20 21 22
Nominal rate, mm 617 557 606 888

Internal control sizes A of a cabin (5-door models)

AND, AND’ The top openings under fastening of plaits of an electrical wiring from the inside of racks (Ø7 of mm)
IN, IN’ The lower openings under fastening of plaits of an electrical wiring from the inside of racks (Ø of 7 mm)
WITH, WITH’ Openings under finishing fastening (Ø of 14 mm)
D, D’ Openings under fastening of the panel of a carpet of a floor (Ø of 6 mm)
E, E’ Openings under fastening of anchor knots of seat belts (Ø of 9 mm)
F, F’ Openings under fastening of the module of a cooler (Ø of 9 mm)
G, G’ Openings under fastening of returnable mechanisms of seat belts (Ø of 18 mm)
N, N’ Openings under finishing fastening (Ø of 6 mm)
I, I’ Openings under fastening of drummers of locks of back doors (Ø of 12 mm)
J, J’ Openings under fastening of plaits of an electrical wiring (Ø of 5 mm)

Number of measurement 1 2 3 4 5 6 7 8 9 10
Nomina-
lny value, mm 		1118 1317 1350 1340 1177 1350 1368 1026 1480 740

The internal control sizes In cabins (5-door models)


AND, AND’; IN, IN’; WITH, WITH’; D, D’; E, E’; F, F’; G, G’; N, N’; J, J’ See above an illustration to measurements And
I, I’ Basic welding openings (Ø of 10 mm)
To Opening under fastening of the lever of the parking brake (Ø of 12 mm)

Number of measurement 1 2 3 4 5 6 7 8 9 10
Nomina-
lny value, mm 		1150 1162 1090 798 1158 978 718 1529 1103 1811

The internal control sizes From a cabin (5-door models, the left side)

AND, AND’; IN, IN’; WITH, WITH’; D, D’; E, E’; F, F’; G, G’; N, N’; I, I’; J, J’ See above an illustration to measurements In
To Opening under fastening of anchor knot of a seat belt (mm Ø12)

Number of measurement 1 2 3 4 5 6 7 8 9 10
Nomina-
lny value, mm 		1681 1936 1993 1589 1258 1129 1021 1031 605 1035

The internal control sizes From a cabin (5-door models, the right side)


AND, AND’; IN, IN’; WITH, WITH’; D, D’; E, E’; F, F’; G, G’; N, N’; I, I’; J, J’; TO See above an illustration to measurements With, the left side

Number of measurement 1 2 3 4 5 6 7 8 9 10
Nomina-
lny value, mm 		1765 2022 2079 1695 1374 1275 1182 1153 852 1124

Control sizes of a back of a body (5-door models)


AND, AND’ Openings under fastening of loopy levels (left: Mm Ø8x12, right: Ø 8 mm)
IN, IN’ Openings under fastening of a telescopic emphasis (Ø of 9 mm)
WITH, WITH’ Basic welding openings (Ø of 6.5 mm)
D, D’ Basic welding openings (left: Mm Ø8x12, right: Ø 12 mm)
E Opening under fastening of the drummer of the lock of a door of a back (Ø of 12 mm)

Number of measurement 1 2 3 4 5 6 7 8 9
Nominal rate, mm 725 1111 574 1303 1498 1037 1303 406 1230

Control sizes of a frame of the chassis (5-door models)

The measurements made in the direct way


And Openings under fastening of basic arms of a body No. 1 (left: Mm Ø28, right: Ø 24 mm)
In Openings in support of racks (Ø of 65.6 mm)
With Openings under fastening of basic arms of a body No. 2 (Ø of 28 mm)
D Drainage openings (Ø of 12 mm)
Е Openings under fastening of basic arms of a body No. 3 (Ø of 28 mm)
F Drainage openings (Ø of 12 mm)
G Openings under fastening of basic arms of a body No. 4 (left: Mm Ø24x28, right: Ø 28х32 mm)

The measurements made in the projective way


And Openings under fastening of basic arms of a body No. 1 (left: Ø 28 mm, right: Ø 24 mm)
In Openings in support of racks (Ø of 65.6 mm)
With Openings under fastening of basic arms of a body No. 2 (Ø of 28 mm)
D Drainage openings (mm Ø12)
Е Basic beam of the fuel tank (Ø of 42 mm)
F Openings under fastening of basic arms of a body No. 3 (Ø of 28 mm)
G Cross tank No. 5 (Ø of 68.5 mm)
N Openings under fastening of shock-absorbers (Ø of 19 mm)
I Openings under fastening of basic arms of a body No. 4 (left: Ø 24х28 mm, right: Ø 28х32 mm)