e26f1d14

14:20. Removal, installation and adjustment of the contact cable reel of the module of a driver's safety cushion

The combined contact socket of an electrical wiring of the cable reel is not subject to dismantle and in an individual order does not change.

Removal and installation

Before starting implementation of the procedure, examine with provided in the Section of the Safety cushion - the general information and precautionary measures the list of security measures!


 PERFORMANCE ORDER

  1. Details of installation of the cable reel are shown on an illustration of the Detail of installation of the module of a driver's frontal safety cushion.
  2. Establish forward wheels in rectilinear situation.
  3. Make sure that forward wheels of the car are given to rectilinear situation.
  4. Remove the module of a driver's frontal safety cushion (see the Section Removal and installation of the module of a driver's safety cushion).
  5. Release a nut of fastening of a steering wheel.
  6. Mark the provision of a wheel of rather steering shaft.
  7. By means of a special stripper dismantle a steering wheel.
  8. Turn out three fixing screws and dismantle the contact cable reel together with the combined understeering switch.
  9. Installation is made upside-down, - before final installation of a steering wheel and the module of a safety cushion do not forget to adjust the cable reel.

Adjustment

At adjustment of the contact cable reel the special pin which is delivered complete with the new understeering switch is used, - at installation of the original switch it is necessary to prepare replacement to an adjusting pin.


 PERFORMANCE ORDER

  1. Temporarily establish a steering wheel and remove forward wheels of the car in rectilinear situation. Remove a wheel.
  2. Against the stop deploy the cable reel clockwise.
  1. Return back a drum on 2.75 of a turn, - arrow indexes on a plate of a drum and its casing have to be combined.
  1. Establish a steering wheel, - track correctness of combination of the landing tags put in the course of dismantle.