7. Systems of electric equipment of the engine
Specifications
|
Separate characteristics are provided also in the text of the head and in case of obligation of their performance are highlighted in bold type. |
System of ignition of the petrol engine
Type | The electronic system of direct ignition (DIS) with a single spark functioning under control of ECM which is guided by indications of sensors of provisions of cranked (CKP) and distributive (CMP) of shaft |
Installation of a corner of an advancing of ignition | 4 ° + 2 ° before VMT (under control of ECM, is not subject to adjustment) |
Ignition order | 1-3-4-2 |
Ignition coils | |
|
Two dual bobbin modules (on one on two cylinders) |
|
12.0 |
|
0.45 ÷ 0.55 |
|
13 ÷ 15 |
Wire VV | |
|
16 |
Spark plugs | |
|
|
|
BKR6E-11 |
|
FR7DCX |
|
RC7YC4 |
|
14FR-7DUX |
|
APP3923 |
Interelectrode gap (all producers), mm | 1.1 |
System of simplification of cold start of the diesel engine
Duration of phases of preheat and post-heat | See the Section System of Simplification of Cold Start of the Diesel Engine |
Protective shutdown of the relay of candles of an incandescence | See the Section System of Simplification of Cold Start of the Diesel Engine |
Resistance of the relay of candles of an incandescence (see the Section Check of the Relay of Candles of an Incandescence), Ohm | 13 |
System of a charge
Rechargeable battery | |
|
|
|
1.280 |
|
0.04 |
|
12 |
|
|
|
60 |
|
68 |
Generator | |
|
Alternating current |
|
|
|
12.-70 |
|
12-60 |
|
Transistor, is built in the bobbin module |
|
|
|
Data are absent |
|
5000 |
|
|
|
Data are absent |
|
1000 ÷ 11000 |
|
|
|
Data are absent |
|
12 |
Vacuum pump (diesel models) | |
|
|
|
Not less than 440 |
|
Not less than 580 |
|
13.0 ÷ 13.5 |
|
57.0 ÷ 57.1 |
System of start
Type of the drive of a bent shaft | |
|
|
|
Bezreduktorny |
|
Reduktorny |
|
Bezreduktorny |
The maximum current at an engine provorachivaniye, And | |
|
130 ÷ 158 |
|
Data are absent |
Starter | |
|
|
|
|
|
0.9 |
|
1.2 |
|
2.0 |
|
|
|
|
|
17 |
|
18 |
|
|
|
11.5 |
|
11 |
The effort (all models) developed by a brush spring, N | 8.8 |
Size of a beating of anchor assembly (all models) |
|
|
0.05 |
|
0.4 |
Collector pro-point (all models) |
|
|
31 |
Depth of a notch, mm |
|
|
0.02 ÷ 0.03 |
|
0.2 |
Working gap of a gear wheel (petrol models), mm |
0.5 |
Axial side play of a gear wheel (diesel models) |
Working gap of a gear wheel of a starter (petrol models)
|
|
1 — a gear wheel Shaft |
5 — a washer Arm |
Efforts of tightening of threaded connections, Nanometer
|
Efforts of tightening of separate elements of fixture can be given directly in the text of sections where they are highlighted in bold type. |
Petrol models
Bolts of fastening of bobbin assemblies | 19 ÷ 25 |
Spark plugs | 25 ÷ 30 |
Bolts of fastening of a starter and its basic arm | 37 ÷ 54 |
Starter plug B nut | 16 ÷ 23 |
Bolts of fastening of the inlet pipeline | 37 ÷ 54 |
Axial and fixing bolts of the generator | 38 ÷ 51 |
Screws of a bearing casing of the generator | 2.0 ÷ 5.4 |
Generator cover bolts | 2.0 ÷ 5.4 |
Nut of fastening of a pulley of the drive of the generator | 59 ÷ 98 |
Screws of fastening of diode assembly of the rectifier | 2.0 ÷ 5.4 |
Bolt of a support of a natyazhitel | 19 ÷ 26 |
Diesel models
Glow plugs | 14.7 ÷ 19.6 |
Bolts of fastening of a starter and its basic arm | 37 ÷ 54 |
Starter plug B nut | 16 ÷ 23 |
Bolts of fastening of the generator (see an illustration) | |
|
19 ÷ 26 |
|
38 ÷ 51 |