e26f1d14

11:10. Dismantling of the brake mechanism of a forward wheel, assessment of a condition of a disk

Removal and installation of components

At assembly track observance of requirements of Specifications of the Head the Brake system to efforts of tightening of carving fixture.

Design of the brake mechanism of a forward wheel

1 — the Flexible brake hose
2 — Nizhny Novgorod the directing bolt
3 — the Fixing bolt
4 — the Gate of pumping of the brake mechanism

5 — the Brake support (the wheel cylinder)
6 — the Brake shoe
7 — the Anchor bracket
8 — the Spring clamp


 PERFORMANCE ORDER

  1. Estimate degree of wear and the general condition of components. Replace defective parts.

Check of a disk

 PERFORMANCE ORDER

  1. Measure disk thickness, - measurements should be made in several points on perimeter. Compare result of measurement to requirements of Specifications of the Head the Brake system, in case of need make replacement.
  1. By means of the measuring instrument of plunger type (DTI) determine the size of a side beating of a disk, - if the result of measurement exceeds extreme admissible value (0.1 mm), give a disk to a pro-point (within the admissible range of thickness), or make its replacement.