e26f1d14

13.2. External equipment and body elements

Removal, installation and adjustment of components of devices of cleaning and washing of a windshield

Scheme of the organization of cleaning of a windshield

1 — Brushes of screen wipers
2 — Levers of screen wipers (leads)
3 — Э / the motor of the drive of screen wipers
4 — the glass washing liquid Tank

5 — the Pump of supply of the washing liquid
6 — the Giving hose
7 — Assembly of drafts of the drive of screen wipers
8 — Nozzles of supply of the washing liquid

Replacement of brushes

 PERFORMANCE ORDER

  1. Allocate the lever for the subject replacement of a brush from a windshield.
  1. Wring out a lock uvula in the lock of a brush and remove the last from a hook on the end of the lever.
  1. When landing a brush to the lever track reliability of a zashchelkivaniye of the lock.

Removal

Levers of screen wipers with brushes

 PERFORMANCE ORDER

  1. Make sure that screen wipers are in "parking" situation, - in case of need include ignition, start and again stop screen wipers.
  1. Dismantle a protective cap, release a fixing nut and remove the lever from a spindle of driving draft.

Electric motor of the drive of screen wipers

 PERFORMANCE ORDER

  1. Open a cowl and turn out four bolts of fastening of an electric motor of the drive of screen wipers.
  1. Disconnect an electrical wiring.
  1. Separate assembly of an electric motor from the panel of a fairing and, having hooked the screw-driver, separate from it draft of the drive of screen wipers.
  1. Remove an electric motor.

Drafts of the drive of screen wipers

 PERFORMANCE ORDER

  1. Turn out six fixing screws, release two clamps and remove a lattice (see the Section Removal and installation of a lattice of a fairing).
  2. Give a fixing bolt and a nut and, working on the left side of the car, remove assembly of drafts of the drive of screen wipers from the fairing panel.
  3. Manually check freedom of rotation of hinged joints of assembly, in case of need add lubricant.

The tank and the pump of supply of the washing liquid

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. Disconnect an electrical wiring of the pump and a hose of supply of liquid.
  1. Turn out fixing bolts and take the tank with the pump installed on it from a motive compartment.

Installation

 PERFORMANCE ORDER

  1. Installation is made upside-down. Track correctness of a condition of an electric motor at connection to it driving draft, - brushes after installation have to fall into a "parking" state. Tighten all fixture with the required effort.

Adjustment snuffled supply of the washing liquid

 PERFORMANCE ORDER

  1. Adjustment is made by turning of a jet of a nozzle by the needle entered its working opening, - the stream has to get to the correct place on glass.

In order to avoid a needle oblamyvaniye in a jet, it is necessary "to release" it previously, heating in a lighter flame.