e26f1d14

13.2.2. Removal, installation and adjustment of components of devices of cleaning and washing of back glass

Scheme of the organization of purification of back glass

1 — a screen wiper Brush
2 — the Cover
3 — Levers of screen wipers (leads)
4 — the Sealant

5 — Driving э / the motor
6 — the glass washing liquid Tank
7 — the Giving hose
8 — the Nozzle of supply of the washing liquid
9 — the Pump of supply of the washing liquid

Replacement of a brush

See the Section External equipment and body elements.

Removal

The screen wiper lever with a brush

 PERFORMANCE ORDER

  1. Cast away a protective cover of shpindelny knot of the lever.
  1. Give a fixing nut and remove the lever from a shaft of a driving electric motor.

Driving electric motor

 PERFORMANCE ORDER

  1. Open a door of a back and remove the panel of its internal upholstery (see the Section Dismantling, removal, installation and adjustment of doors).
  1. Working through an aperture in a door frame, disconnect an electrical wiring, turn out a fixing bolt and remove a screen wiper drive electric motor.

The tank and the pump of supply of the washing liquid

 PERFORMANCE ORDER

  1. Open a back door, turn out fixing screws and remove the panel of finishing of the right wall of the luggage compartment.
  1. Disconnect an electrical wiring of the pump and a hose of supply of the washing liquid.
  2. Turn out a fixing bolt and remove the tank assembled with the pump installed on it.

Nozzle of supply of the washing liquid

 PERFORMANCE ORDER

  1. By means of the thin screw-driver with a flat sting wring out a lock uvula and release a nozzle from the body panel.

Installation

 PERFORMANCE ORDER

  1. Installation is made upside-down, - track correctness of placement of a brush on glass. Tighten all fixture with the required effort.

Adjustment snuffled supply of the washing liquid

 PERFORMANCE ORDER

  1. Adjustment is made by turning of a jet of a nozzle by the needle entered its working opening, - the stream has to get to the correct place on glass.

In order to avoid a needle oblamyvaniye in its jet it is necessary "to release" previously, heating in a lighter flame.