13.2.6. Removal and installation of door rear-view mirrors

Details of installation of an external rear-view mirror (on the example of a driver's door)

1 — the Panel of internal finishing
2 — mirror Glass

3 — the Switch of the electric drive of adjustment of mirrors
4 — an electrical wiring Plait


  1. Having hooked, remove the triangular panel of internal finishing of a support of a mirror.
  1. Turn out three fixing screws, at the corresponding complete set (model with the electric drive of adjustment of mirrors) disconnect an electrical wiring of driving electric motors and remove assembly of a mirror from a car door.
  1. On the models equipped with the electric drive of adjustment of door mirrors glass of a mirror it can be taken from a frame casing in an individual order by a poddevaniye by his thin pallet after a preliminary warming up the household hair dryer.
  1. By means of an ohmmeter make sure available conductivity between battery plugs of the contact socket of an electrical wiring of a mirror.
  1. Installation is made upside-down, - track reliability of tightening of carving fixture and a zashchelkivaniye of clamps of the finishing panel.