e26f1d14

6.2.8. Removal and installation of the fuel pump

Try not to damage its such fragile components as a toplivozabornik and a float of the sensor of a reserve of fuel in the course of extraction of pump assembly! See also prevention at the beginning of the Section Removal and installation of the fuel tank!


 PERFORMANCE ORDER

  1. Perform procedures of the Section Removal and installation of the fuel tank.
  2. Turn out eight fixing screws of fastening to a tank of a landing flange of pump assembly.
  1. Accurately turning and slightly inclining here and there, release pump assembly from the fuel tank, - try not to damage a toplivozabornik and a float of the sensor of a reserve of fuel, - and turn in a paper towel. At once to a zakuporta an adjusting window of pump assembly in the fuel tank.
  1. In case of need separate the mesh filter of a toplivozabornik from pump assembly and remove actually the pump.
1 — the Pump
2 — the Lock ring
3 — the Mesh filter
4 — pressure Sensor
5 — the Nut
6 — the Dustproof tube of the sensor
1 — the Fuel hose
2 — the Fixing collar
3 — the Pump
4 — pressure Sensor
  1. Assembly and installation are made as it should be, skim milk to an order of dismantle of components, - record the electrical wiring brought to pump assembly an adhesive tape.