7.1.9. Removal and installation of the sensor of position of the camshaft (CMP)
|
PERFORMANCE ORDER |
|
|
- 1. Introduction
- 2. Governing bodies and methods of operation
- 3. Current leaving and service
- 4. Engine
- 5. Cooling systems, heating, ventilation and air conditioning
- 6. Power supply systems, engine management / decrease in toxicity of the fulfilled gases and production of the fulfilled gases
- 7. Systems of electric equipment of the engine
- 7.1. System of ignition of the petrol engine
- 7.1.1. General information, security measures
- 7.1.2. Checks of a control system of ignition
- 7.1.3. Check of a corner of an advancing of ignition
- 7.1.4. Check of coils of ignition
- 7.1.5. Check of a condition of VV of an electrical wiring
- 7.1.6. Check of the sensor of a detonation
- 7.1.7. Replacement of coils of ignition
- 7.1.8. Spark plugs - the general information
- 7.1.9. Removal and installation of the sensor of position of the camshaft (CMP)
- 7.1.10. Removal and installation of the sensor of provision of a bent shaft (CKP)
- 7.1.11. Removal and installation of the sensor of a detonation (KS)
- 7.2. System of simplification of cold start of the diesel engine
- 7.3. Systems of a charge and start
- 7.1. System of ignition of the petrol engine
- 8. Five-step manual box of gear shifting
- 9. Automatic transmission
- 10. Transmission line
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Onboard electric equipment
- 15. Control body sizes
- 16. Schemes of electric connections
