- Disconnect a negative wire from the battery.
- Hang out the car above the ground.
- Disconnect an electrical wiring from VSS.
- Turn out a fixing bolt and release assembly of the sensor of speed with the driving coupling from a case of the transfer case.
- Estimate degree of wear of a driving gear wheel, in case of need make replacement.
- Having put a new sealing ring, fill assembly of the drive of a speedometer in a case of the transfer case. Screw a fixing bolt and tighten it with the required effort (7 Nanometers).
- Connect an electrical wiring to VSS.
- Lower the car on the earth.
- Connect a negative wire to the battery.
|
|
