e26f1d14

7.3.5. Removal and installation of the generator

Removal

All models

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the battery.
  2. If it is required, dismantle the procedures impeding the implementation components of an inlet air path (see Power supply systems, managements of engine/decrease in toxicity of the fulfilled gases and production of the fulfilled gases).
  3. Disconnect all electrical wiring brought to it from the generator.

Petrol models

 PERFORMANCE ORDER

  1. Release an axial bolt and a bolt of fastening of a natyazhitel.
1 — the Axial bolt
2 — the Fixing bolt of a natyazhitel
3 — the Adjusting bolt of a natyazhitel
4 — the Driving belt
5 — Natyazhitel of a driving belt
6 — an arm Bolt
7 — the Adjusting arm
  1. Rotation of an adjusting bolt weaken a tension of a driving belt and remove the last from a generator pulley.
  2. Finally screw a fixing bolt and remove a natyazhitel.
  3. Turn out an axial bolt.
  4. Release a bolt in the basis of an adjusting arm and develop the last up.
  5. Having lifted the generator, take it from a motive compartment.

Diesel models

 PERFORMANCE ORDER

  1. Release axial and adjusting bolts, develop assembly of the generator and take off a driving belt from a pulley.
  1. Disconnect oil and vacuum hoses.
  2. Turn out both bolts and remove the generator.

Installation

Petrol models

 PERFORMANCE ORDER

  1. Start the generator on the regular place.
  2. Freely screw an axial bolt.
  3. Develop an adjusting arm in regular situation, having lowered its not top part of the generator.
  4. Put on an adjusting arm a natyazhitel of a belt, having freely recorded it a fixing bolt.
  1. Throw with a driving belt a generator pulley and, rotating an adjusting bolt (1), adjust effort of its tension according to requirements of Specifications of the Head Sistema of electric equipment of the engine.

Diesel models

 PERFORMANCE ORDER

  1. Installation is made as it should be, the return to an order of dismantle of components, - adjust effort of a tension of a driving belt by the shift of assembly of the generator (see Specifications of the Head Sistema of electric equipment of the engine), then tighten axial and adjusting bolts with the required effort.

All models

 PERFORMANCE ORDER

  1. Track correctness of connection of an electrical wiring to generator plugs.